This guide will show you how to install Windows 11 on a Raspberry Pi. We’ll be using Rufus, which is available for both Windows and OS X users that allows us to create bootable USB drives with ease. The guide includes everything from downloading the latest build of Microsoft’s newest operating system to choosing your preferred language and time zone before we’re all set up and ready for our first steps in the world of Linux-powered computing.
The “windows 11 raspberry pi 4 wifi driver” is a guide that will help you with the installation of Windows 11 on Raspberry Pi. The guide also includes a list of steps, and pictures to help you through the process.
Windows 11 will be available for standard PCs at the end of 2021, but it can already be installed on a Raspberry Pi. It’s not as simple as installing a Raspberry Pi-specific Linux distro, but it’s not difficult. Everything will be explained in this essay.
The simplest approach to install Windows 11 on a Raspberry Pi is to use WoR Flasher on the Raspberry Pi OS to flash Windows 11 straight onto an SSD drive. The same utility may be used on a PC, whether it’s running Windows or Linux.
We’ll start there since there are several conditions to making this work. Then I’ll show you how to install Windows 11 on your Raspberry Pi step by step. You can get Windows 11 up and running on your Raspberry Pi in a matter of minutes (if you have a strong Internet connection).
If you want to get started with the Raspberry Pi fast, check out my e-book. It’s a 30-day challenge in which you learn something new every day until you’ve mastered the Raspberry Pi. The first third of the book covers the fundamentals, but the latter chapters feature tasks that you may do on your own.
To Install Windows 11 on a Raspberry Pi, You’ll Need These Prerequisites
The Pi Glossary is available for download. If you’re confused by all the new terms and acronyms, get my free Raspberry Pi dictionary (PDF format)!
Because Windows 11 isn’t the typical operating system for a Raspberry Pi, there are a few things you’ll need to get right before you can begin the method below.
On a Raspberry Pi, Windows 11 “functions,” but don’t anticipate ideal performance. Whatever hardware you choose, it will be sluggish. Knowing this, it’s essential to utilize the greatest equipment you can in order to get the best results from this experiment.
Here are my suggestions for achieving the greatest results:
Prerequisites for software
The only need is that you have current firmware that allows you to boot from a USB drive and even set it as the default option.
It should be alright if you’ve previously booted from a USB drive or if your Raspberry Pi device is newer than 2021. There isn’t much you can do.
If this isn’t the case, you’ll need to upgrade the firmware and set the USB boot as the default in raspi-config. In my course, I go over everything, and there’s a full project where I go over how to boot from a USB drive, but here are the instructions you’ll need in a nutshell: apt update sudo sudo raspi-config sudo apt full-upgrade sudo rpi-eeprom-update
Today’s Raspberry Pi Bootcamp Sale is 10% off. Take it a step farther. I’m here to assist you in getting started with the Raspberry Pi. Learn all of the necessary abilities in the proper sequence.
You may go to the following step after you’ve finished (or if you know your device is already prepared). In any event, if you notice that your Raspberry Pi is not booting from the USB device, you may return to this page.
Are you having trouble navigating the Linux command line? First, read this article, which has the most critical instructions to memorize as well as a free printable cheat sheet with the commands at your fingertips.
Method 1: Use the Raspberry Pi OS to install Windows 11.
Installing Windows 11 on a Raspberry Pi is easier when done straight from the Raspberry Pi OS. Unlike the second technique, you won’t have to travel to strange websites to select the right picture to download; the procedure is simple, and the program will take care of everything.
The following are the procedures to install Windows 11 from the Raspberry Pi OS:
- Install Pi-Apps on the Raspberry Pi operating system.
- Install WoR Flasher with Pi-Apps.
- To make a USB drive with Windows 11, use WoR Flasher.
We’ll go through how to accomplish it step by step now. And if you’d want to see this instruction in video form, here’s the link to the video on my channel:
On your Raspberry Pi, install the Raspberry Pi OS.
You must have Raspberry Pi OS installed on your Raspberry Pi before proceeding. For Raspberry Pi, I suggest using an SD card, and for Windows, a USB drive (key or SSD).
If you’re starting from scratch, you may use this instruction to install Raspberry Pi OS on your SD card and set up the system. You’ll need access to the internet and a current operating system.
I’m using a Raspberry Pi 4 (4 GB) with Raspberry Pi OS Bullseye, although the system version and Raspberry Pi model shouldn’t make a difference. If you have an SD card with Buster already on it, use it.
Pi-Apps may be installed on your Raspberry Pi.
After that, you must install Pi-Apps. Pi-Apps is an utility that allows you to quickly install a variety of apps on your Raspberry Pi. It’s not required, but it will make the following stages a lot simpler.
The installation instructions are available on their GitHub website, however in general, you may install it with one command:
- Open a terminal window.
- Copy and paste the following command into your shell: wget -qO- https://raw.githubusercontent.com/Botspot/pi-apps/master/install | bash
That’s all there is to it; Pi-Apps is now accessible in the main menu, and you can go to the next stage.
Install WoR Flasher with Pi-Apps.
We can utilize Pi-Apps to install WoR Flasher on Raspberry Pi OS now that it’s installed. WoR stands for “Windows on Raspberry Pi” and is a program that allows you to quickly install Windows 11 on a USB drive.
Here’s how to set it up:
- Pi-Apps are open-source applications for the Raspberry Pi. It’s in the Accessories section of your main menu.
- Find “Windows Flasher” at the end of “All Apps” or “Tools.”
- Choose it and click “Install.”
Pi-Apps will take care of everything. It will take a few minutes for it to be installed on your Raspberry Pi, so be patient.
To install Windows 11, use WoR Flasher.
Start WoR Flasher from the main menu — it’s also under the Accessories submenu – after it’s installed. The user interface is simple, and it will prompt you with the following questions:
- To choose the Windows version to install and the Raspberry Pi model to use.
- The appropriate language to employ.
- The device on which you’d want to install Windows 11. To prevent any issues, make sure you just have your USB drive plugged in at this point (flashing Windows 11 on your backup disk isn’t a smart idea!).
- You will see an installation summary; there is nothing you need to do here; the application will utilize the optimum settings for your device automatically.
- To begin the installation, just click “Flash.”
The lengthy portion of the procedure will then begin. The utility will download all of the essential files; depending on the Raspberry Pi model, Internet connection speed, and USB drive used, this may take some time. Just make sure your Raspberry Pi is turned on and not in sleep mode during this time.
In only 30 days, you’ll have mastered the Raspberry Pi. Today’s sale is 10% off. Get the eBook here. In a 30-day challenge, uncover the mysteries of the Raspberry Pi. Learn important Linux skills and put them to work on a variety of projects.
When everything is ready, you’ll get a success message indicating that it is.
If you have any problems with the disk formatting, please let us know. Gparted should be installed, all partitions on the USB device should be deleted, and a new partition table should be created. This manner, the tool will be rebuilt from the ground up, which should increase its chances of success (I got a few issues with this too).
The very first boot
Shut down your Raspberry Pi, remove the SD card carrying the Raspberry Pi OS, and attach just the USB device that has Windows 11. Wait a few seconds after turning on the Raspberry Pi. If you followed the instructions to the letter, the device should now boot from the USB drive and show something similar to this:
This will take a long time, particularly if you don’t use the greatest Raspberry Pi model with an SSD disk, as I recommend. You won’t get this with the second approach, which I’ll show you now, but it’s not a big deal since this one takes care of everything.
Once everything is ready, it will reboot (maybe several times) until showing the tradition Windows 11 The very first boot wizard. You just need to follow it to get your system ready.
Method 2: Install Windows 11 from a different computer.
The second way is to prepare the USB drive with Windows 11 on another machine. It’s much the same as if you followed my instruction on how to install Windows 10 on a Raspberry Pi. It’s not difficult, but there are more stages and opportunities for mistakes than with the Raspberry Pi OS approach. If you don’t already have Raspberry Pi OS on an SD card, it could be a little quicker.
The following are the major steps for installing Windows 11 on a Raspberry Pi from a different computer:
- WoR Flasher may be downloaded and installed on your computer.
- Download a script to create a Windows 11 image.
- To get the Windows 11 files, run the script.
- To get everything on the USB device, use WoR imager.
I’ll go through each step in detail now.
Before you do anything further, you must first download two files:
- A Windows 11 image: this website can generate a script to download everything for you and create an ISO file. That’s where things get a little messy, as you need to choose an image version. I remember that when doing this test for Windows 10, not all images worked, so I lost a lot of time there. Make sure to pick a Windows 11 version for ARM64. You can exclude some editions to make the whole process way faster (for example, don’t include Windows Pro if you’ll install Windows Home). I don’t know if there is the same issue with Windows 11, but to be safe, here is the one I took to write this tutorial.
- You may get the WoR imager from there. It’ll be used to flash the previous picture onto a USB device using this utility. To flash Windows on any support, think of it as a Raspberry Pi Imager or Etcher.
You may go to the following step after you have both files on your computer.
Installation of the WoR imager
The first step is to download and install the WoR image on your PC. There is no need to install anything; all you have to do is unpack the files and execute the WoR.exe program.
For the time being, you can’t use it; just make sure you have it and that it’s working properly.
Downloading files for Windows
You must first download the Windows files before proceeding. The UUPdump zip file contains merely a script; it does not yet include a Windows image.
Run the following script after extracting everything into a new folder: uup download windows.cmd
Because there are many gigabytes to download from the servers, it will take some time, particularly if you have a sluggish Internet connection, but you will ultimately obtain an ISO file in the same folder. 22523.1000.211210-1418.RS PRERELEASE CLIENTCORE OEMRET A64FRE EN-US is the name of my. ISO and weighs in at roughly 4 GB.
Today’s sale on Master Python on Raspberry Pi is 10% off. Get your hands on the eBook. Make the most of your Raspberry Pi by learning new ideas and using shortcuts. If you don’t know Python, you’ll lose out on half of the pleasure of using a Raspberry Pi.
You may go to the last step, which is to utilize WoR imager, after you have it in your folder.
Last but not least, put everything on a USB stick.
You may now restart Windows on Raspberry Imager and transfer everything to your USB drive using the wizard:
- Choose a language.
- Then there’s the storage drive and the Raspberry Pi model.
- Select the picture you just downloaded from the drop-down menu (located in the script folder).
- Select the option to get the most recent version of the drivers and firmware.
- Start the installation when you’ve confirmed the default setup.
The program will then transfer everything to the specified device, which will take a few minutes. Depending on the USB drive you select, it may take longer or shorter; an SSD in USB 3 is often much quicker than an SD card or an old USB key.
After that, connect the USB drive to your Raspberry Pi and turn it on.
Final thoughts & going further
Take a look at my cheat sheet! Get your free PDF file with all the Raspberry Pi instructions you’ll ever need!
Whatever the method you choose, the The very first boot will start with a welcome wizard, where you can configure a few things like the language, the country and time zone, the keyboard layout, etc. It will also ask you to name your device and connect to your Microsoft account (unfortunately, I haven’t found a way to avoid this…).
You’ll receive the standard first-session opening message (“Getting everything ready for you”) at the conclusion of this procedure, and then you’ll see the Windows 11 interface:
Everything seems to be in working order; I haven’t spent much time with it, but I haven’t seen any serious problems. The only problem is that everything moves at a snail’s pace for me. I’d rather use a Linux distro optimized for this device (even if it means certain programs aren’t accessible) than use Windows and have everything run slower.
However, I recognize that some of you may want Windows to run on particular programs if you just have a Raspberry Pi. So, even if I wouldn’t suggest it in my favorite Raspberry Pi configurations, it’s fantastic to see it working. The network is up and running, I’ve got my data synced with my PC thanks to OneDrive (even if I don’t want it), and you can install programs from Microsoft Store just as you would on a regular computer.
In conclusion, experimenting with Windows 11 on a Raspberry Pi is a fun endeavor. It may be able to assist some of you get access to programs that aren’t accessible on Linux, and you can install it even if the Raspberry Pi is your only computer. But don’t expect too much from it; for the most part, it’ll remain an experiment rather than a system we’ll use on a daily basis on the Raspberry Pi.
If you don’t need Windows, there are alternative solutions that look like Windows but perform far better, such as Twister OS or any of these desktop environments.
Resources for the Raspberry Pi
Don’t know where to begin? Learn all there is to know about the Raspberry Pi, stop looking for assistance all the time, and start enjoying your projects. Now is the time to watch the Raspberry Pi Bootcamp course.
In only 30 days, you’ll have mastered the Raspberry Pi. You don’t want just the basics? This book is for you if you want to learn the best ways to become a Raspberry Pi expert. With step-by-step instructions, you may learn important Linux skills and perform a variety of tasks. Take a look at the e-book.
VIP Members’ Club You may also join the Patreon community if you simply want to hang out with me and show your support. I provide you early access to my stuff and share behind-the-scenes information there. When you join, you’ll also receive a shoutout. More information may be found here. Do you need assistance building anything using Python? Any Python script for your Raspberry Pi may be created, understood, and improved. Learn the basics in a step-by-step manner, rather than wasting time on irrelevant ideas. Now is the time to get the e-book.
This website also contains all of my tool and hardware suggestions.
Windows on Raspberry Pi is a new way to install Windows 11 on the Raspberry Pi. The process is quite simple, but it does require some technical knowledge. This guide will show you how to get started with Windows 11 on Raspberry Pi. Reference: windows on raspberry pi.
Frequently Asked Questions
Can you run Windows 11 on a Raspberry Pi?
How do I install PI on Windows 11?
A: First, you need to download the .vbs file from this link. Then extract it and run vbscript /nologo pifile.pif in your command prompt/administrative powershell window with administrator privileges and then type a yes when asked if you want to install PI on Windows 11 by following these instructions
Can I install Windows 11 on MBR?
A: Yes, you can install Windows on MBR.
- raspberry pi 4 windows 10 performance
- windows 10 for raspberry pi 4 download
- raspberry pi 4 windows 10 64-bit
- windows 10 raspberry pi download